LED BRICK STAR

Dimmable
UL Listed
Instructions
PDF Cut Sheet

COVER OPTIONS

Louver Cover
Prism Cover
Scoop Cover
New! Stainless Steel Louver Cover
Recommended for use in corrosive environments as salt air, adjacent bodies of water, or installed in caustic materials such as limestone. Three year warranty.

COVER COLOR OPTIONS

White
Bronze
Black
Aluminum

ACCESSORIES

Concrete Cap - direct pour mounting! BL-CC
Brick Light Concrete Cap

Required for all concrete pour and brick applications
Concrete Cap
Installed in fixture
Replaceable LED Module Replaceable LED Module
LEDMOD-32-FF

APPLICATIONS

  • BRICK WALLS
  • INTERIOR STEPS
  • EXTERIOR STEPS
  • AISLES
  • HALLS
  • PATHS
  • PATIO LIGHTING
  • ENTRY LIGHTING
  • POST LIGHTING

DESCRIPTION

Die cast aluminum wall mount LED light fixture fits standard brick void and consumes only 5.2 watts. 72% energy savings vs. Xenon/Halogen technologies. Dimmable. 120VAC input and output of fixture up to 150 fixtures per 15A tap. Replaceable 120VDC LED Module included. UL listed Wet Location for all interior and exterior wall, ceiling and concrete pour applications. Offered in three cover styles and five fixture finishes, including Stainless Steel Louver Cover with fluorocarbon lacquer coated aluminum can.


SCHEMATIC

Schematic

FEATURES

Features

SPECIFICATIONS

Voltage 120VAC
Fixture Energy Rating 120VAC, 43mA, 5.2 watts
LED Module Life Replaceable 120VDC LED Module rated at 40,000 hours
LED Color Temperature 3100K +/- 200K
Cover Finish White, bronze, aluminum, black or stainless steel
Can Finish White with aluminum reflector for aluminum cover fixtures. Stainless steel cover option has fluorocarbon lacquer black can.
Construction Both cover and can are die cast aluminum for corrosion protection, strength, weight, and consistency of finish. New Stainless Steel Louver option.
Lens Frosted tempered glass
Wiring Options 120V can be parallel wired ("daisy chained") up to 150 fixtures per tap. Check local code and NEC for wiring selection.
Dimming Dimmable. See instructions for details.
Agency Approval UL listed wet location for all interior and exterior wall, ceiling and concrete pour applications.
Warranty Two years powder coated finish, 3 years stainless steel finish. See warranty page for details.

PHOTOMETRICS

LOWER WALL MOUNT APPLICATION Floor Photometrics LED Brick Star (Model no. LBR-P-WH-WH)
Lumens = 70.2  |  Watts = 5.2
Grid Location: A A1 A2 B B1 B2 C C1 C2 D D1 D2
Illuminance in Footcandles: 0 0 0 6.42 2.51 0.52 1.91 1.26 0.53 0.70 0.56 0.33

ORDERING LOGIC

LBR-Z-XX-YY

Z = Fixture Type XX = LED Color YY = Fixture Finish
L = Louver Cover WH = White WH = White
S = Scoop Cover   BZ = Bronze
P = Prism Cover   BK = Black
    AL = Aluminum
    SS = Stainless Steel (Louver only)

ASSEMBLY SCHEMATIC