|
|
| Four fixture colors. |
 |
|
|
|
|
|
| Outdoor application with minimal ambient light |
Indoor application with soft ambient light |
|
APPLICATIONS
- HALLWAYS
- STAIRS
- ENTRYWAYS
- DOORWAYS
- GARAGES
- PORCHES
- WALKWAYS
- LOBBIES
- COLUMNS
- DIRECTIONAL ACCENTS
- ARCHITECTURAL ACCENTS
Shipping July 2011
STYLES & OPTIONS
AVAILABLE IN FOUR FIXTURE FINISHES
WHITE FINISH
BRONZE FINISH
BLACK FINISH
ALUMINUM FINISH
Included in every fixture box:
(1) LED Sconce Light fixture
(1) 4" x 4" mounting bracket
(2) Bracket-to-fixture mounting bolts and cap nuts
(1) Short circuit connector
(1) Instructions
|
FEATURES
- Energy usage of 7.7 watts per fixture.
- The same light output of Xenon/Halogen technology.
- 60,000-hour light source average life.
- CREE™ LEDs inside.
- Powder coated die cast aluminum construction.
- LED driver included in every fixture.
- Uses standard household Romex™ wire input/output, and mounts to a standard 4" x 4" junction box.
- Maximum of 66 fixtures per 110VAC, 15AMP circuit.
- Included LED Module short circuit connector.
- UL listed "Wet Location".
|
BENEFITS
- Energy savings from 80% vs. Xenon/Halogen technology.
- Provides more than enough light for illuminating halls, aisles, steps, or almost any traffic or accent area.
- Six times (6x) the average life of Xenon/Halogen technology.
- Consistent quality of a worldwide LED manufacturer. Replaceable LED Modules.
- Offers corrosion protection, strength and weight advantages, and consistency of finish.
- 110VAC input and output. No remote power source to hide or wire.
- No custom cords to buy. Wiring totally hidden within structure walls.
- Over twice the allowed fixtures per circuit as Xenon/Halogen technology.
- For illumination flexibility, one LED module can be unpowered.
- Suitable for indoor and outdoor use.
|
SPECS
| Voltage |
110VAC inout and output to every fixture. Integral LED Driver interior to every fixture powers two replaceable LED Modules. |
| Fixture Energy Rating |
Both modules 110VAC, 70mA, 7.7 watts. One module 110VAC, 40mA, 4.4 watts. |
| LED Color Temperature |
2900K +/- 200K |
| Average LED Module Life |
CREE™ LEDs with 60,000 hours |
| Fixture Finish |
Powder coated white, black, aluminum and bronze |
| Construction |
Fixture is die cast aluminum for low fixture weight and corrosion protection. Junction box cover is stamped steel. |
| Lens |
Tempered Glass |
| Wiring Options |
110VAC can be parallel wired ("daisy chained") up to 66 fixtures maximum per circuit. Check local code and NEC for wiring selection. |
| Dimming |
Not for use with dimmers. |
| Agency Approval |
UL listed and labeled for Wet Location. Wall Mount only. |
LED Sconce Photometrics
LED Sconce Light (wide opening down, narrow opening up)
| Floor Photometrics |
|
| Grid Location: |
A |
A1 |
A2 |
B |
B1 |
B2 |
C |
C1 |
C2 |
D |
D1 |
D2 |
|
Illuminance in
Footcandles: |
1.83 |
1.66 |
1.23 |
1.73 |
1.54 |
1.18 |
1.35 |
1.25 |
0.98 |
0.94 |
0.89 |
0.75 |
| Ceiling Photometrics (ceiling height 8ft. above floor) |
|
| Grid Location: |
A |
A1 |
A2 |
B |
B1 |
B2 |
C |
C1 |
C2 |
D |
D1 |
D2 |
|
Illuminance in
Footcandles: |
20.3 |
0.32 |
0.06 |
11.16 |
0.21 |
0.05 |
1.24 |
0.08 |
0.03 |
0.04 |
0.02 |
0.01 |
| Ceiling Photometrics (ceiling height 9.5ft. above floor) |
|
| Grid Location: |
A |
A1 |
A2 |
B |
B1 |
B2 |
C |
C1 |
C2 |
D |
D1 |
D2 |
|
Illuminance in
Footcandles: |
6.66 |
0.63 |
0.08 |
4.97 |
0.85 |
0.07 |
2.68 |
1.19 |
0.05 |
1.06 |
0.19 |
0.03 |
ONE LED MODULE CAN BE UNPOWERED
For application requiring light in the up or down direction only.
Both modules powered |
Short circuit connector installed in upper module |
LIGHT OUTPUT FLEXIBILITY
Each fixture has a narrow and a wide opening on opposite fixture ends. Fixtures are symmetrical and mounting can be accomplished with either opening pointing up or down.
Narrow Opening
7/16" W x 1-5/8" H |
Wide Opening
1-3/16" W x 1-5/8" H |
MOUNTS TO STANDARD 4" x 4" JUNCTION BOX
For ease of either new construction or energy saving retrofit installation.
|
|
