Self-contained Task Light Fixture - LED Technology UL Listed
Installation InstructionsInstallation Instructions

APPLICATIONS

  • UNDER CABINET TASK LIGHT
  • OFFICE AND MEDICAL WORK STATIONS
  • LABORATORIES
  • DISPLAY CASES AND EXHIBITS
  • MERCHANDISING
  • INDIRECT ACCENT LIGHT
  • WALL UNITS AND BARS
  • OVER CABINET ACCENT LIGHT

AVAILAILABLE IN FIVE SIZES

1-LED Module fixture
LTL-1-HW/XX Hardwire
LTL-1-PC/XX Power Cord
2-LED Module fixture
LTL-2-HW/XX Hardwire
LTL-2-PC/XX Power Cord
3-LED Module fixture
LTL-3-HW/XX Hardwire
LTL-3-PC/XX Power Cord
4-LED Module fixture
LTL-4-HW/XX Hardwire
LTL-4-PC/XX Power Cord
5-LED Module fixture
LTL-5-HW/XX Hardwire
LTL-5-PC/XX Power Cord

AVAILAILABLE IN SIX FIXTURE FINISHES

LOUVER COVER WHITE

SCOOP COVER COPPER

PRISM COVER BRONZE

CLEAR REPLACEMENT BULB POLISHED BRASS

XENON STEP LIGHT PACKAGING ALUMINUM

CLEAR REPLACEMENT BULB BLACK

FEATURES

  • Energy usage from 4.4 to 17.0 watts per fixture.
  • The same light output of Xenon/Halogen technology.
  • 60,000-hour light source average life.
  • CREE™ LEDs inside.
  • Pleasingly warm color temperature of 2900K.
  • LED driver(s) included in every fixture
  • Uses standard household ROMEX™ wire input/output.
  • Maximum of 132 LED Modules per 110VAC, 15AMP circuit.
  • Available in six fixture and five fixture lengths.

BENEFITS

  • Energy savings from 75% to as much as 81% vs. Xenon/Halogen technology.
  • Provides more than enough light for reading and detail work.
  • Six times (6x) the average life of Xenon/Halogen technology.
  • Consistent quality of a worldwide LED manufacturer. Replaceable LED Modules.
  • Visually the same color temperature as 2800K Xenon/Halogen technology.
  • 110VAC input and output. No remote power source to hide and wire.
  • No custom cords to buy. Wiring can be job cut to exact lenghts.
  • Twice the allowed fixtures per circuit as Xenon/Halogen technology.
  • We can match virtually every kitchen cabinet and plumbing fixture combination.

SCHEMATIC

LED
Module		 Fixture
Wattage		 Length Width Height
1 4.4W 9" 4.625" 1.25"
2 7.2W 17.5" 4.625" 1.25"
3 9.8W 26" 4.625" 1.25"
4 15.0W 34.5" 4.625" 1.25"
5 17.0W 38.5" 4.625" 1.25"

SPECS

Voltage 110VAC input to fixture via customer installed hardwire or factory installed power cord. Integral LED Driver(s) interior to every fixture.
LED Color Temperature 2900K +/- 200K
Average LED Module Life 60,000 hours
Fixture Finish White or black powder coating; bronze, copper or polished brass anondized, or natural aluminum
Packaging Individually packaged in 2-color corrugated box, J-rack compatible.
Construction Aluminum extruded frame with injection molded ends for low fixture weight and consistency of finish.
Lens Frosted glass for even light distribution. Hinged to aluminum frame for ease of fixture installation and security.
Wiring Options Hardwire or power cord options. Hardwire option can be parallel wired ("daisy chained") up to 132 LED Modules.
Dimming Not for use with dimmers.
Agency Approval UL listed and labeled. Damp Location.

3 LED MODULE TASK LIGHT PHOTOMETRICS
(Model no. LTL-3-PC/WH)

Floor Photometrics
WORK STATION PHOTOMETRICS H=14"
Grid Location: A A1 B B1 C C1 D D1
Illuminance in Footcandles: 46.8 31.9 49.7 33.8 41.4 28.4 30.1 21.4
KITCHEN CABINET PHOTOMETRICS H=18"
Grid Location: A A1 B B1 C C1 D D1
Illuminance in Footcandles: 35.8 25.6 37.2 26.5 32.4 23.3 26.1 19.1

WIRING OPTIONS

wiring wiring

INSTALLATION AND OPERATIONAL FEATURES
install install
Push-in connector Easy-to-use hinged lens design.
Captive Screw Schematic
Captive Mounting Screw

REPLACEABLE LED MODULES


LED module in LED Task Light fixture
Individually UL Listed as a replaceable component
LEDMOD-12-CR
LED Module
Floor Photometrics